Fax Settings - Canon imageCLASS D780 Fax Manual

FAX SETTINGS

USER SETTINGS
1.TEL LINE SETTINGS
1.USER TEL NO.
2.TEL LINE TYPE
TOUCH TONE
ROTARY PULSE
3.TX START SPEED
4.RX START SPEED
2.UNIT NAME
3.TX TERMINAL ID
1.TTI POSITION
2.TEL NUMBER MARK
4.DENSITY CONTROL
LIGHT
STANDARD
DARK
5.PROG 1-TOUCH KEY
01 - 12
USE
DO NOT USE
9-4
Name Descriptions
The basic operation settings in the Fax mode can be
specified.
Specify the telephone line settings.
Your telephone and fax number can be registered.
(→ p. 2-4)
Selects the telephone line type. (→ p. 2-7)
The telephone line is set for touch tone dialing.
The telephone line is set for rotary pulse dialing.
Sets the transmission speed for all documents you send.
33600bps/14400bps/9600bps/7200bps/4800bps/240
0bps
Sets the transmission speed for all documents you receive.
33600bps/14400bps/9600bps/7200bps/4800bps/240
0bps
You can register your name (or your company name).
(→ p. 2-5)
Prints your ID (transmitting terminal ID) on each page
you transmit. (→ p. 2-3)
OUTSIDE IMAGE: Terminal ID is printed outside the
image border.
INSIDE IMAGE: Terminal ID is printed inside the image
border.
Selects the prefix for the identification header number.
FAX, TEL
Sets the density of the documents.
Sets for dark documents.
Sets for the documents of normal density.
Sets for light documents.
Programs a fax function into the One-Touch key. The
programmed fax function will be executed by directly
pressing the corresponding One-Touch key. You do not
need to press Function before pressing the One-Touch
key.
Select the One-Touch key (01 to 12) in which you want
to program the fax function.
Uses PROGRAM 1-TOUCH KEY.
The following functions can be programmed:
1.REPORT;
2.DELAYED TX;
3.FAX MONITOR;
4.MEMORY REFERENCE;
5.BOOK SENDING.
Disables PROGRAM 1-TOUCH KEY.
(The factory default setting is in bold face.)