Canon imageCLASS D780 Fax Manual page 84

Canon fax guide d780
Hide thumbs Also See for imageCLASS D780:
Table of Contents

Advertisement

ADD. REGISTRATION
Name
1-TOUCH SPD DIAL
1-TOUCH SPD DIAL
1.TEL NUMBER ENTRY
2.NAME
3.OPTIONAL SETTING
ON
1.TX TIME SETTING
2.TX TYPE
OFF
Descriptions
Registers the informations on One-Touch Speed Dialing.
(→ p. 3-2)
Selects a one-touch speed dialing key.
Registers the other party's telephone number.
Registers the other party's name.
The transmission time and settings including the
registration of password and subaddress can be specified.
The optional settings can be set.
5 settings of the transmission time can be specified.
Setting procedure
1 Select the time setting number (1 to 5) by repeatedly
pressing Set, and press Set again.
2 Enter the hour and minute for the transmission time
using the numeric keys, then press Set. (Enter 0 before
the 1-digit hour or minute. For example, enter "0905"
for 9:05 am.)
• If you make a mistake while entering, press
Function and Clear, then enter the correct time.
Sending procedure
1 Load the document face down in the ADF or on the
platen glass.
2 Press the one-touch speed dialing key on which the
transmission time is set. The document is scanned and
stored in memory.
The machine transmits the document at the transmission
time. If you have set more than 2 transmission time settings,
the document will be transmitted at the preset time closest to
the time that the document has been scanned.
Once you set the transmission time, the machine will
transmit the document at the same time on every day.
However, you cannot use the one-touch speed dialing key to
send the document as usual, and cannot send the document
any time unless you cancel the transmission time setting.
To cancel the setting, press Set in TX TIME SETTING to
select the preset time, and press Set again. Then, press
Function and Clear, and press Set. The preset time is
deleted.
If you have set more than 2 transmission time settings,
repeat this procedure to delete all the preset times. Or. when
OFF is selected in OPTIONAL SETTING, TX TIME
SETTING and TX TYPE are canceled. You do not need to
delete all the preset times.
REGULAR TX: For a normal transmission.
SUBADDRESS TX: For a subaddress transmission.
Registers passwords and subadresses.
POLLING RX: For a polling reception. Registers
passwords and subadresses.
No setting.
(The factory default setting is in bold face.)
9
9-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageclass d760Imageclass d761

Table of Contents