Table of Contents
Advertisement
Setting up the Media
Renderer feature
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR. When
operating as a DMR, the TV displays content
provided by a DMS. The selection of the media is
done by the DMC - the TV does not select the input.
The TV can play photo, movie, or audio files when
operating as a DMR.
Installation
You can configure the DMR settings individually, or use
Installation mode to be prompted for each setting in order.
a
In the PREFERENCES menu, highlight Media
Renderer Setup and press OK.
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Network Lock
Panel Lock
Display Settings
b
B
b
Press
or
to highlight Installation, and press OK.
c
C
c
Press
or
to select On, and press OK.
d
If you want to change the device name as a Renderer,
highlight the Device Name field and press OK. The
Software Keyboard window will appear.
e
Input the Device Name by using the Software
Keyboard (see page 42). Press the BLUE button.
NOTE: The Device Name can be up to 127 characters
long.
f
Highlight Done, and then press OK to save your
setting.
g
If you want to change the password, press
select Yes, and then press OK.
h
i
j
k
l
m
a
b
Auto
Off
The TV's DMR device name can be changed. The device name
a
b
c
d
e
C
c
or
to
43
CONTROLS AND FEATURES
Change the password by using the Software Keyboard
(see page 42), and then press the BLUE button.
NOTE: The Web Password can be up to 15 characters
long.
Highlight Done, and then press OK.
If you want to limit access from unexpected DMCs,
C
c
press
or
to select On, and then press OK.
If you want to proceed with registration of DMCs, press
C
c
or
to select Yes, and then press OK.
B
b
Press
or
to highlight the item you want to accept,
and press OK. A check will appear in the box. To
remove the check, press OK again.
c
Press
to highlight Done, and then press OK.
The Maximum Volume Setup window appears. Press
C
c
or
to adjust to the desired volume. Then, press
OK.
Media Renderer
In the PREFERENCES menu, highlight Media
Renderer Setup and press OK.
B
b
Press
or
to highlight Media Renderer, and then
C
c
press
or
to select On or Off.
Device Name Setup
can be confirmed from the DMC.
In the PREFERENCES menu, highlight Media
Renderer Setup and press OK.
B
b
Press
or
to highlight Device Name Setup, and
press OK.
Highlight the Device Name field and press OK. The
Software Keyboard window will appear.
Input the Device Name by using the Software
Keyboard (see page 42). Press the BLUE button.
NOTE: The Device Name can be up to 127 characters
long.
Highlight Done, and then press OK to save your
setting.
Advertisement
Table of Contents
