Comcast Wireless Gateway User Manual page 10

3. Enter a WiFi network name of your preference. Remote computers use this name to identify the
router. It is case-sensitive and can be up to
32 characters in length. A valid WiFi network
name can contain only letters, numbers, hy-
phens or underscores. No spaces or periods
are allowed. i.e. XFINITY-12456.
4. Select an encryption method that is sup-
ported by your computer or device
(Fig. 3).
5. Depending on your selection, you may be
required to enter a Network
Password. Click F
INISH
Note: The Wireless Gateway can be connected to wireless B, G and N devices operating at 2.4
GHz.
After your initial setup and on subsequent logins, when you access http://10.0.0.1, you will see the
Web Management Interface screen as described on the following page.
Wireless Gateway User Guide
.
Fig. 3
7