To Change Volume Lock To The Audio Mode - Universal Electronics Millenium 4 User Manual

Millennium 4 Mnl M4090
CHANGING VOLUME LOCK (CONTINUED)

To change Volume Lock to the AUDIO mode:

NOTE: Performing these steps will allow you to access the volume
control of your audio component in all modes.
1. On the Millennium 4, press and hold SETUP
until the LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press AUDIO once. The
LED will blink twice.
Now, whenever you press Volume +,Volume –,
3.
or MUTE on the Millennium 4, volume will be
controlled by your audio component.
32
7/23/99 9:34 AM Page 32