Installing Drivers And Applications; Installing Ulead Videostudio Application - Creative Audigy Platinum eX Getting Started Manual

Installing Software
Installing Drivers
and Applications
During the installation
process, Windows 98 SE
users will be prompted to
insert the
Windows 98 SE installation
CD into the CD-ROM drive.
Insert the installation CD into
the CD-ROM drive and then
click the OK button.
Installing Ulead
VideoStudio
Application
You need to install device drivers and applications to use Sound Blaster Audigy
Platinum eX. To install these drivers and the bundled applications, use the following
instructions. The instructions are applicable to all supported Windows operating
systems.
1. After you have installed the Sound Blaster Audigy card, Audigy Extension card,
and external Audigy Drive, turn on your computer. Windows automatically detects
the audio card and device drivers.
2. When prompted for the audio drivers, click the Cancel button.
3. Insert the Sound Blaster Audigy installation CD into your CD-ROM drive.
The disc supports Windows AutoPlay mode and starts running automatically. If
not, you need to enable your CD-ROM drive's auto-insert notification feature. For
more details, see "Problems Installing Software" on page C-1.
4. Follow the instructions on the screen to complete the installation.
5. When prompted, restart your system.
Refer to the section which applies to your Windows operating system.
Installing Software 3-1