Sbemixer.exe - Creative Audigy Platinum eX Getting Started Manual

SBEMIXER.EXE

Use SBEMIXER.EXE to change the volume levels of the MPU-401 instrument set
used on the Sound Blaster Audigy card. You can use SBEMIXER.EXE from the
command line—useful for advanced users who want to set up batch files with
particular volume levels—or within the SBEMIXER screen. The settings for
SBEMIXER.EXE are independent of the Creative Mixer settings in Windows 98 SE.
To set SBEMIXER values in the command line:
At the DOS prompt, type the SBEMIXER command in a single line. Its syntax is
SBEMIXER [/S:x] [/W:x] [/C:x] [/M:x] [/?]
where square brackets [ ] denote optional parameters, and
This
Parameter Specifies
/S:x Synth volume. x can be a value from the range 0 to 127.
/W:x Wave volume. x can be a value from the range 0 to 127.
/C:x CD audio volume. x can be a value from the range 0 to 127.
/M:x Synth MT-32/LAPC-1 mode. For x, 0 is Off, 1 is On.
/? View a short description of the parameters.
An example of an
SBEMIXER
SBEMIXER /S:64 /W:120 /C:50 /M:0
which corresponds to "set the synth volume to 64, the Wave volume to 120, the CD
audio volume to 50, and turn off the Synth MT-32/LAPC-1 mode".
To set SBEMIXER values within the Mixer screen:
At the DOS prompt, type SBEMIXER.
The interactive editor mode allows you to change the mixer settings with the mouse,
<Tab>, <PgUp>, <PgDn>, or arrow keys.
Use the Save button to save the settings for the next session.
command is
SB Emulation in MS-DOS/Windows 98 Second Edition B-9