Problems In Windows - Creative Audigy Platinum eX Getting Started Manual

Problems in
Windows NT
4.0
3. In the System Properties dialog box, click the Device Manager tab.
4. Under the Sound, Video And Game Controllers entry, select the conflicting audio
card driver—indicated by an exclamation mark (!)—and click the Properties
button.
5. In the Properties dialog box, click the Resources tab.
6. Make sure that the Use automatic settings check box is selected, and click the
OK button.
7. Restart your system to allow Windows 98 SE/Me to reassign resources to your
audio card and/or the conflicting device.
A Service Control Manager error message appears with one or more other error
messages at system restart.
This occurs after you remove an audio card from your computer after you have
successfully installed the Sound Blaster Audigy card. Windows is trying to match the
drivers to the removed audio card.
To solve this problem:
1. Log on to your computer as Administrator.
2. Click Start -> Settings -> Control Panel.
3. Double-click the Multimedia icon, and then click the Devices tab.
4. In the list, remove from under these entries
• Audio Devices
• MIDI Devices And Instruments
the items other than
• Audio for Creative Sound Blaster Audigy
• MIDI for Creative Sound Blaster Audigy
• MIDI for Creative S/W Synth
Troubleshooting C-9