Hard Drive Cage Option - HP ProLiant DL380p User Manual

Install an expansion board into the PCI riser cage.
7.
Install the optional secondary PCI riser cage.
8.
If not already installed, install the secondary processor
9.
Install the access panel (on page 25).
10.
Install the server into the rack
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Power up the server (on page 23).
14.

Hard drive cage option

A SAS expander card or an additional SAS controller option is required to support the hard drive cage
option.
("Installing the server into the
("Processor and fan option" on page 42).
rack" on page 38).
Hardware options installation 76