Access The Systems Insight Display - HP ProLiant DL380p User Manual

Item Description
Health LED
2
NIC status LED
3
UID button/LED
4
*Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
**To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and
reference the server troubleshooting guide.

Access the Systems Insight Display

To access a pop-out HP Systems Insight Display:
Press and release the panel.
1.
After the display fully ejects, rotate the display downward to view the LEDs.
2.
Status
Solid green = Normal
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Fast-flashing red (4 Hz/cycles per sec) = Power fault**
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote management or
firmware upgrade in progress
Off = Deactivated
Component identification 10