Remove The Hot-Plug Fan Cage - HP ProLiant DL380p User Manual

Open the cable management arm. Note that the cable management arm can be right-mounted or
2.
left-mounted.

Remove the hot-plug fan cage

To remove the component:
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend ("Extend the server from the
3.
Remove the access panel (on page 24).
4.
Remove the air baffle (on page 32).
5.
rack" on page 23) or remove the server from the rack.
Operations 26