Table of Contents
Advertisement
Installing the Bracket and Camera
I
NSTALLING THE
Install the sunshield to protect the camera from rain and to minimize heat
build-up from sun exposure. To install the sunshield, see Figure 11 and
perform the following.
Note: For interior installations, the sunshield might not be necessary.
Figure 11. Installing the sunshield
1)
Slide the sunshield into the desired position on the camera.
2)
Tighten the sunshield screws (4) on both sides of the sunshield.
10
S
UNSHIELD
Bullet Camera User Manual
/ Se
ptember 2003
1043349A
Advertisement
Table of Contents
