KTC Compact Cameras Table of Contents ABLE OF ONTENTS ............... 4 EFORE EGIN ..........5 ANEL OMPONENTS ............6 NSTALLING THE 2.1 C ....... 6 ONNECTING AN DIP S ........7 ROGRAMMING THE WITCH 3.1 S – (AES DD) ......7 HUTTER ONTROL 3.2 B...
For assistance in installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact Kalatel Technical Support: GE Interlogix, Kalatel division Call: 800-469-1676 Fax: 541-752-9096 Note: You should be at the equipment, ready with details before calling Technical Support.
KTC Compact Cameras Back Panel Components ANEL OMPONENTS Refer to Figure 1 when performing the camera setup procedures described in the following sections. Auto iris DIP switch connector Direct drive auto 24 VAC iris level power adjuster source Power To monitor Figure 1.
Installing the Lens KTC Compact Cameras NSTALLING THE The KTC compact cameras will accept any CS-mount type lens. To use a C-mount type lens, add a 5mm adapter ring. ONNECTING AN If you are using an auto iris lens, attach the lens to the camera and insert the lens plug into the auto iris connector (Figure 1).
KTC Compact Cameras (ATW/FIX) HITE ALANCE Note: This switch is not available for the KTC-115CC • Auto-tracking white balance (ATW) mode In the ATW mode, the range of colors in the scene being monitored is tracked continuously, and the white balance is set automatically by an internal micro-controller.
KTC Compact Cameras Installing the Camera into a Housing NSTALLING THE AMERA INTO A OUSING Depending on the type of housing used, it will probably be necessary to feed the cables through the housing before connecting them to the camera. In addition, it may be helpful to install the camera into the housing before making cable connections.
Making Cable Connections KTC Compact Cameras AKING ABLE ONNECTIONS To connect the video and power cables, see Figure 6 and perform the following. Attach the monitor’s video in BNC connector to the camera’s VIDEO OUT connector. With a screwdriver, loosen the ~AC24V terminal connectors on the terminal block.
KTC Compact Cameras Making Additional Adjustments AKING DDITIONAL DJUSTMENTS ETTING THE EVEL If you are using a plug-in, auto iris, DC-type lens, it may be necessary to make adjustments to the direct drive level to achieve a good picture in all light conditions.
Making Additional Adjustments KTC Compact Cameras Adjust the lens’ focal position (with the filter in place, if used) by gently turning the back focus adjustment ring to achieve the sharpest image. Retighten the back focus adjustment lock screw carefully while ensuring that the focus does not change.
CRT, which carry a 12-month warranty from the date of purchase. For all warranty repairs, GE Interlogix, Kalatel division, will cover all costs, including parts, labor, and shipping. Repaired equipment will be returned via the same method of shipment in which it was received. If a customer requests a faster return shipment, the difference will be charged.