Advertisement
Getting started
Keep holding down the 7 (STOP) button on the front panel.
3
After a few more seconds, "RGB" replaces "S-VIDEO" in the display window.
Now the RGB signal can be output when setting the Y/C - COMP . switch to "COMP." .
(Display Window)
LPCM
VCDVD
MPEG
3
8
DOLBY
PROGRAM
DIGITAL
RANDOM
DTS
• To make the S-VIDEO outputs, use the similar procedure.
NOTES
• Connect the unit for a PAL or Multi-scan TV. Do not connect the unit to an NTSC TV.
• When making the audio connection using the AV connector, set "DOWN MIX" on the "AUDIO" page of the preference display to
"Lo/Ro" and the "SPEAKER SETTING" to "2 CHANNEL" (see pages 44 and 45).
To connect to an audio amplifier or receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
The unit
SUBWOOFER
CENTER
RIGHT
PCM / STREAM
RIGHT
OPTICAL
COAXIAL
DIGITAL OUT
AUDIO OUT
Red
• Connect the unit's AUDIO OUT (FRONT LEFT/RIGHT) to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
NOTE
• When making the audio connection using the FRONT (LEFT and RIGHT) jacks for stereo use, set "DOWN MIX" on the "AUDIO"
page of the preference display to "Lo/Ro" and the "SPEAKER SETTING" to "2 CHANNEL" (see pages 44 and 45).
16
TITLE TRACK CHAP
LEFT
VIDEO OUT
REAR
VIDEO
LEFT
Y/C
FRONT
S-VIDEO
White
Audio cable
(supplied)
A - B
1
AV COMPU LINK
VIDEO OUT
AV
COMP.
Amplifier or receiver
IN
White
LEFT
AUDIO
RIGHT
Red
Advertisement
