Advertisement
To connect to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear audio
sound with better quality, connect the audio output to your audio equipment.
The unit
SUBWOOFER
CENTER
RIGHT
LEFT
REAR
PCM / STREAM
RIGHT
LEFT
FRONT
OPTICAL
COAXIAL
DIGITAL OUT
AUDIO OUT
Set the Y/C - COMP . switch correctly according to your TV.
• If the TV only accommodates the composite video signal, set the switch to "COMP." .
• If the TV accommodates the Y/C signals, set the switch to "Y/C" so that you can enjoy better-quality pictures.
• If the TV accommodates the RGB signals, set the switch to "COMP ." , as well as make the unit feed the RGB signals by
following the procedure shown below.
How to make the unit feed the RGB signals
The unit cannot output the RGB signals from the SCART connector and the S-video (Y/C) signals from the S-VIDEO jack
simultaneously.
In the initial (factory-preset) condition, the S-VIDEO jack is active, while the RGB signals cannot be output.
To make the unit feed the RGB signals, follow the procedure below. Note that the S-VIDEO jack does not feed correct
signals when the unit is set to output the RGB signals.
¶ When the unit is turned on
1
Set the Y/C - COMP . switch to "COMP ." .
Press and hold down the 7 (STOP) button on the front panel when no disc is inserted or while the unit is stopped.
2
"S-VIDEO" appears in the display window after a few seconds.
(Display Window)
LPCM
VCDVD
3
8
MPEG
DOLBY
PROGRAM
DIGITAL
RANDOM
DTS
Y/C - COMP . switch
VIDEO OUT
VIDEO
Y/C
COMP.
S-VIDEO
TITLE TRACK CHAP
SCART cable
(not supplied)
AV COMPU LINK
VIDEO OUT
AV
1
A - B
Getting started
TV
IN
AV
S-VIDEO
VIDEO
IN
LEFT
AUDIO
RIGHT
English
15
Advertisement
