Restoring The System Drive Back To The Factory-Shipped Condition - Hitachi HF-W6500 45/40 User Manual

3.3 Restoring the System Drive Back to the Factory-Shipped Condition

Follow the procedure below to restore the system drive of an HF-W6500 Model 45/40 to the
shipment conditions by using a recovery DVD.
1. Turn on the power to an HF-W, and insert a recovery DVD "HITACHI HJ-654x*****
Product Recovery DVD" to the DVD drive. (The underlined part is the model number of
the HF-W6500 Model 45/40 you purchase, and therefore the part indicated as *s is different
depending on the model. In the following description of the procedure, replace the
"HJ-654x*****" with the model number of the HF-W6500 Model 45/40 you purchased.
Note that the seventh letter from the left is always "x".)
2. When you boot from the recovery DVD, the following confirmation message is displayed.
*******************************************************
"HITACHI HJ-654x***** Product Recovery DVD" is
only used for HJ-654x*****.
Is this computer HJ-654x*****?
*******************************************************
(Yes[y]/No[n]):
If you press the [n] key, the following message is displayed and the confirmation is
canceled.
Press the power switch to turn off the power to the HF-W.
(Yes[y]/No[n]):n
System recovery process is canceled.
3. If you press the [y] key, a confirmation message for starting restoration of the drive is
displayed.
*******************************************************
This recovery program deletes all personal data and
your customized configuration settings. It resets
HJ-654x***** to the factory-shipped default values.
Be sure to back up your personal files before you use
this DVD.
******************************************************
continue?
(Yes[y]/No[n]):
3. RESTORING THE FACTORY CONDITION USING A RECOVERY DVD
Confirmation
Attention
3-3