Attach The Feet; Log In To The Access Point - NETGEAR WN804 User Manual

Attach the Feet

Attach the feet to the access point as shown so that you can place it in a vertical position.
Figure 4. Attach the feet to the access point

Log In to the Access Point

To log in, you need to use a computer with a fixed IP address.

To log in to the access point:
1. Prepare a computer with an Ethernet adapter.
If this computer is already part of your network, record its TCP/IP configuration settings.
Configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 as
the subnet mask.
WN804 Access Point
Getting Started
9