•
Wireless Settings (2.4 GHz). These are the same settings that are specified in the
Wireless Settings screen. See
•
Guest Network. These are the same settings that are specified in the Guest Network
screen. See
Set Up a Guest Network
Specify IP Settings
You can assign an IP address to the access point.
To specify the IP settings:
1.
Select IP Settings:
2.
If you want to use a dynamic IP address, select the Get IP Address Dynamically check
box.
The IP Address field and the IP Subnet mask field are populated.
3.
For a static IP address, fill in the IP Address and IP Subnet Mask fields.
4.
(Optional) Select the Get DNS Server Address Dynamically check box.
5.
Click Apply.
Specify Wireless Settings
The Wireless Settings screen lets you view or configure the wireless network setup.
The access point comes with preset security. This means that the Wi-Fi network name
(SSID), network key (password), and security option (encryption protocol) are preset in the
factory. You can find the preset SSID and password on the bottom of the unit.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
WN804 Access Point
Specify Wireless Settings
on page 19.
Basic Configuration
14
on page 14.