NETGEAR WN804 User Manual page 37

2. Select Advanced Setup > Wireless Repeating Function.
3. Select the Enable Wireless Repeating Function check box.
4. Select the Wireless Repeater radio button.
5. Fill in the Repeater IP Address field.
This IP address has to be in the same subnet as the base station, but different from the
LAN IP address of the base station.
6. (Optional) Select the Disable Wireless Client Association check box to prevent wireless
clients from associating with the repeater and allowing LAN client associations only.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the repeater.
7. In the Base Station MAC Address field, enter the MAC addresses for the access point that
should function as the base station.
8. Click Apply.
Your settings are saved.
9. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the access point can connect to the
Internet or share files and printers with any other computer or server connected to the
other access point.
WN804 Access Point
Advanced Configuration
37