Table of Contents
Advertisement
Set Up a Wireless Schedule
You can use this feature to turn off the wireless signal from your access point at times when
you do not need a wireless connection. For example, you could turn it off for the weekend if
you leave town.
Note:
Before you can set up a wireless schedule, the access point must
connect to the Internet so that it can automatically set the correct
system time.
To configure and enable the wireless schedule:
1.
Select Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
2.
Click the Add a new period button.
3.
Use the radio buttons and check boxes to set up a period during which you want to turn off
the wireless signal.
4.
Click the Apply button.
The Advanced Wireless Settings screen displays.
5.
Select the Turn off wireless signal by schedule check box to activate the schedule.
6.
Click the Apply button.
Enable or Disable 20/40 GHz Coexistence
You can adjust this setting to fit the environment in which your wireless network operates. By
default, the Enable 20/40 Hz Coexistence check box in the Advanced Wireless Settings
screen is selected to avoid interference with other wireless networks in the area. If another
wireless network is detected in the area, the coexistence feature might reduce the maximum
speed of your 2.4 GHz wireless network by half.
WN804 Access Point
Advanced Configuration
31
Advertisement
Table of Contents
