Set Up A Guest Network - NETGEAR WN804 User Manual

1. Select WPS Wizard.
2. Click Next.
The following screen lets you select the method for adding the WPS client (a wireless
device or computer).
You can use either the push button or PIN method.
3. Select either Push Button or PIN Number.
• To use the push button method, either click the WPS button on this screen, or press
the WPS button on the side of the access point. Within 2 minutes, go to the wireless
client and press its WPS button to join the network without entering a password.
• To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The access point attempts to add the WPS-capable device. The WPS LED
front of the access point blinks green. When the access point establishes a WPS
connection, the LED is solid green, and the access point WPS screen displays a
confirmation message.

Set Up a Guest Network

A guest network allows you to let visitors use the Internet without using your wireless security
key.
WN804 Access Point
Basic Configuration
19
on the