Table of Contents
Advertisement
To set up a guest network:
1.
Select Guest Network.
2.
Select any of the following wireless settings:
•
Enable Guest Network. When this check box is selected, the guest network is
enabled, and guests can connect to your network using the SSID of this profile.
•
Enable SSID Broadcast. If this check box is selected, the wireless access point
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt
the correct SSID for connections to this access point.
•
Allow guest to access My Local Network. If this check box is selected, anyone who
connects to this SSID has access to your local network, not just Internet access.
3.
Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the wireless devices in your network to use the guest network name in
addition to the main SSID.
4.
Select a security option from the list.
The security options are described in
5.
Click Apply.
Your settings are saved.
WN804 Access Point
Wireless Security Options
Basic Configuration
20
on page 16.
Advertisement
Table of Contents
