American Dryer Corp. ML-410 Installation & Operator's Manual

Phase 7

Download this manual

ML-410 Phase 7

Installation/Operator's Manual

Page 1 ML-410 Phase 7 Installation/Operator’s Manual...
Page 2 ML-410 DATE OF PURCHASE MODEL NO. DISTRIBUTORS NAME Serial Number(s)
Page 5 Table of Contents...
Page 21 Maximum Capacity (Dry Weight) Minimum Capacity (Dry Weight) Tumbler (Basket) Diameter Tumbler (Basket) Depth Tumbler (Basket) Volume Drive Motor Blower Motor (Gas/Steam) Door Opening Door Still Height - Level Compressed Air Compressed Air Connection Voltage Available Heat Input Approx. Weight (Uncrated) Airflow Inlet Pipe Size Voltage Available...
Page 22 ILTING t a t LEARANCE LLOW ANCES...
Page 30 MAN3507 MAN2771 MAN2247 MAN3506...
Page 33 MAN3507...
Page 39 M LG-410 (Gas) M LS-410 (Steam) 25 HP (ADC Part No. 181006) Blower Motor 7-1/2 HP (ADC Part No. 181017) Drive LECTRICAL IMPORTANT: 208 VAC 230 VAC ARE NOT THE SAME. When ordering, specify exact voltage. NOTE: A. Fuse ratings are dual-element, time-delay, current limiting, class RK1 or RK5 ONLY. B.
Page 42 Manifold Pressure* 3.5 inches W.C. Inline Pressure 6.0 inches W.C. Shaded areas are stated in metric equivalents * Measured at gas valve pressure taps when the gas valves are on. Type of Gas Natural Liquid Propane 8.7 mb 10.5 inches W.C. 14.9 mb 10.5 inches W.C.
Page 47 t a t...
Page 66 Message Message Display Description TEMPERATURE SET POINT ALHi ALARM HI INPUT DEVICE º F OR º C DECIMAL POINT InPt INPUT FAULT TIMER SET POINT LOW SET POINT HIGH SPSt SET POINT STATE SET POINT OUTPUT SPOL LOW LIMIT SET POINT OUTPUT SPOH HIGH LIMIT SPLP...