Summary of Contents for American Dryer Corp. Gas/Steam Models ML-82
Page 1
ML-82 Parts Manual Phase 6 Microprocessor American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com ADC Part No. 450403 033099DMG/abe...
Page 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
Table of Contents Control Door Assembly ... 2 Phase 6 OPL Microprocessor Control Panel Assembly ... 3 Front Panel/Main Door Assemblies ... 4 Main Door Switch Assembly ... 5 Front Panel Assembly ... 6 Lint Drawer/Lint Drawer Switch Assembly ... 7 Basket (Tumbler)/Support Assemblies ...
Illus. No. Part No. Qty. Description 112366 Logo ONLY 881691 Control Door (includes illus. nos. 2, 3, and 8) 117604 Neoprene Sponge Tape (sold by the foot) 150309 #10-16 x 1/2” Hex Head TEK Crimptite Screw 102603 Control Door Rod Support Catch 102601 Control Door Retainer Clip 102502...
Illus. No. Part No. Qty. Description -------- Front Panel (refer to Front Panel Assembly on page 6) 102214 30” Door Glass ONLY 170730 Door/Glass Adhesive (10.3 oz. cartridge) 102357 Main Door Gasket ONLY (7/8” x 7/8” x 104”) 835003 Main Door Assembly Complete (includes illus.
Main Door Switch Assembly Illus. No. Part No. Qty. Description 150006 #6-32 x 7/8” Phillips Pan Head Machine Screw 152013 #6-32 Hex Nut 153010 #6 Star Washer 137005 Single Pole Door Switch 150443 1/4-20 x 3/4” Stainless Steel Cap Screw 881687 Main Door Switch Housing ONLY 881702...
Illus. No. Part No. Qty. Description 881780 Basket (tumbler) ONLY 881782 1-3/4” Reversing Basket (tumbler)/Support Assembly Complete (includes illus. nos 1 through 12) 150413 #10-16 x 1/2” TORX Head Crimptite Screw 150429 TORX Hand Driver (for removal of TORX head screw) 390074 Basket (tumbler) Rib ONLY 153002...
Blower Motor Assembly Illus. No. Part No. Qty. Description 100169 5L-350 V-Belt (fan shaft to motor) 100704 1/4” x 1/4” x 1-3/4” Key 101138 SDS x 1-1/8” Bushing 101202 2B x 5.2 Pulley 100043 3 HP Motor 152004 3/8-16 Hex Nut 153002 3/8”...
Totally Enclosed, Fan-Cooled (T.E.F.C.) Drive Motor/Fan Shaft Motor Mount Assemblies Illus. No. Part No. Qty. Description 100158 4L-550 V-Belt (motor to idler) 101130 5/8” x 2-1/2” Motor Pulley 181003 1/2 HP 3ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 150501 5/16-18 x 3/4” Machine Bolt 153002 5/16”...
Illus. No. Part No. Qty. Description 802237 Burner Box ONLY 881258* Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 30) 881257* Liquid Propane (L.P.) Burner Assembly II Complete Less Orifice (includes illus. nos. 1 through 9 and 11 through 30) 318041 Burner Shield 150309...
Hot Surface Ignition (HSI) Burner Assembly Illus. No. Part No. Qty. Description 881597 Hot Surface Ignitor - 24 VAC 128921 Hot Surface Ignition (HSI) Flame-Probe 141105 Large Burner Tube 150103 #8-32 x 1/2” Phillips Pan Head Machine Screw 153000 #8 Steel Bar 151001 #8-32 Pal Nut 10**...
Illus. No. Part No. Qty. Description 312527 Outer Top Assembly 150301 #8-18 x 7/16 Phillips Pan Head TEK Screw 323759 Top Back Guard Assembly (26-7/8” x 13-15/16”) 150301 #8-18 x 7/16” Phillips Pan Head TEK Screw 323749 Rear Electrical Box Cover (10-13/16” x 9-3/4”) 150301 #8-18 x 7/16”...