Recording System Check - Sony DCR-TRV9 Service Manual

2. Recording System Check

Note: Perform "Playback System Check" before this check.
1) Playback the BIST check tape.
2) Input the following data in order.
Note: Press the PAUSE button each time set the data.
Page Address
4 41
4 0F
4 0E
4 40
4 0F
4 40
4 40
4 0F
4 40
4 40
4 0F
4 40
3) While keep the HOLD switch of the adjustment remote
commander at ON (SERVICE) position, eject the BIST check
tape and insert a tape for recording in place of the tape.
4) Select page: 0, address: 01, and set data: 01.
5) Only for AEP and UK model, select page: D, address: 14, after
memorizing the data, set the bit value of bit 0 to "1", and then
press the PAUSE button. (Refer to "4-3, 3. Bit value
discrimination" of "5-4. Service Mode").
6) Select page: D, address: 15, after memorizing the data, set data:
07 and then press the PAUSE button.
7) While keep the HOLD switch of the adjustment remote
commander at ON (SERVICE) position, set to the VTR
recording mode. (Use the wireless remote commander of 8mm
VCR, only for AEP and UK model.)
8) Select page: 4, address: 11, and set data: 02, then press the
PAUSE button.
9) Select page: 4, address: 13, and set data: 02, then press the
PAUSE button.
10) Select page: 4, address: 11, and set data: 00, then press the
PAUSE button.
IC1701 (D1) Recording System Check
11) Select page: 3, address: 01, and set data: 0D, then press the
PAUSE button.
12) Select page: 4, address: 1C, and set data: FF, then press the
PAUSE button.
13) Select page: 4, address: 11, and set data: 04, then press the
PAUSE button.
14) Select page: 4, address: 11, and set data: 00, then press the
PAUSE button.
15) Select page: 4, address: 13, and set data: 03, then press the
PAUSE button.
(The data will be automatically return to "00".)
16) When the IC1601 (U1)
normal, following data will be displayed in page: 4, address:
14 and 15.
Page Address
4 15 C6 (NTSC), F8 (PAL)
4 14
90 (NTSC), 3E (PAL)
Data
01
02
01
01
0A
00
01
0E
00
01
8E
00
IC1701 (D1) recording system is
Data
17) When the IC1701 (D1)
normal, following data will be displayed in page: 4, address:
16 and 17.
Page Address
4 17 19 (NTSC), 2A (PAL)
4 16 AA (NTSC), AE (PAL)
18) When the IC1901 (A1)
normal, following data will be displayed in page: 4, address:
18 and 19.
Page Address
4 19 76 (NTSC), CE (PAL)
4 18
B9 (NTSC), E7 (PAL)
19) When the IC1701 (D1)
normal, following data will be displayed in page: 4, address:
1A and 1B.
Page Address
4 1B 98 (NTSC), DC (PAL)
4 1A E6 (NTSC), 85 (PAL)
20) Only for AEP and UK model, select page: D, address: 14, and
set the data memorized at step 5) .
21) Select page: D, address: 15, and set the data memorized at step
6).
22) Press the PAUSE button of the adjustment remote commander.
23) Select page: 0, address: 01, and set data: 00.
5-56
IC3501 (INDI) recording system is
Data
IC1701 (D1) recording system is
Data
IC6101 (DX) recording system is
Data