Additional Functions In The Bluetooth® Menu - Blaupunkt Hamburg 420 BT Operating And Installation Manual

Each entry consists of a name and a number, each
up to 20 characters on digits.
Note:
Do not switch off the car sound system while
transferring the phone book. If you do or if the
power supply of the car sound system should
be interrupted for any reason, you have to re-
start the transfer.
u In the Bluetooth® menu, select the "DOWN-
LOAD P–BOOK" menu item.
u Press the rotary control
The display shows "CONFIRM".
u Press the rotary control
"PHONEBOOK DOWNLOADING – PLEASE
WAIT" appears on the display.
After the download is complete, the display
briefl y shows "DOWNLD COMPLETE".
Notes:
• To cancel the transfer, press the
<
ton .
• If the transfer of the phone book fails,
the display briefl y shows "DOWNLOAD
FAILED".
• If the transfer of the phone book exceeds
the storage capacity of the car sound sys-
tem, the display briefl y shows "PHONE-
BOOK FULL". The phone book entries trans-
ferred so far remain stored.
• If you supplemented or changed entries
on your cell phone since the last transfer,
you can update the phone book on the car
sound system by transferring it again. If the
storage capacity of the car sound system
is exceeded in the process, fi rst delete the
already transferred phone book (see the
next section) or unpair another cell phone,
if necessary, so that its phone book is also
deleted from the car sound system (see the
chapter "Additional functions in the Blue-
tooth® menu", section "Managing paired
devices").
7
.
7
again.
but-
• If you insert a CD during an ongoing trans-
fer, the playback does not start until the
transfer is completed.
Deleting the phone book of the cell phone
from the car sound system
You can delete the phone book of the connected
cell phone.
Note:
The telephone remains connected.
u In the Bluetooth® menu, select the "DELETE
P–BOOK" menu item.
u Press the rotary control
The display shows "CONFIRM".
u Press the rotary control
Additional functions in the
Bluetooth® menu
Changing the Bluetooth® PIN
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
u In the Bluetooth® menu, select the "PIN EDIT"
menu item.
u Press the rotary control
menu.
You can now enter the PIN:
u Turn the rotary control
the respective position.
u Press the rotary control
position.
Note:
To return to the previous position in the
entry menu, turn the rotary control
the "<<<" option is selected, and press the
7
rotary control .
Bluetooth®
7
.
7
again.
7
to open the entry
7
to select a digit for
7
to go to the next
7
until
21