Additional Functions In The Bluetooth® Menu - Blaupunkt barcelona 230 Operating And Installation Instructions

Additional functions in the
Bluetooth® menu
Changing the Bluetooth® PIN
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
u In the Bluetooth® menu, select the "PIN EDIT"
menu item.
u Press the On/Off button
menu.
You can now enter the PIN:
u Turn the volume control
for the respective position.
u Press the
or button
or previous position.
Notes:
• You can also reach the next position by
pressing the ON/Off button
• While entering the PIN, you cannot change
the volume or mute the car sound system.
u Press the
button
reach past the last position to confi rm the PIN
entered and return to the Bluetooth® menu.
Managing paired devices
The paired Bluetooth® devices can be managed in
the Bluetooth® menu.
The device list shows the Bluetooth® names or
addresses of the paired devices. You can do the
following:
• Disconnecting the connection to the currently
connected Bluetooth® device
• Establishing a connection to one of the paired
Bluetooth® devices
• Unpairing Bluetooth® devices
u In the Bluetooth® menu, select the "PHONE
LIST" menu item.
u Press the On/Off button
device list.
The fi rst device on the list is displayed.
3
to open the entry
4
to select a digit
7
to reach the next
3
.
7
repeatedly until you
3
to open the
Note:
If no device is paired, "EMPTY LIST" is briefl y
displayed.
u Turn the volume control
ent device.
You have the following options:
To connect the displayed device,
u press the
button
As soon as the device is connected, "CON-
NECTED" is briefl y displayed and you are re-
turned to the Bluetooth® menu.
Note:
If no connection can be established, the
display briefl y shows "CONNECT FAILED". If
the device is already connected, the display
briefl y shows "CONNECT EXIST".
To disconnect the connection to the displayed
device,
u press the 5
button
The display briefl y shows "DISCONNECTED"
and you are returned to the Bluetooth® menu.
Note:
If the device was not connected, the display
briefl y shows "NO CONNECTION".
To unpair the displayed device,
u press the 5
button
onds.
The display briefl y shows "DELETED" and you
are returned to the Bluetooth® menu.
Note:
If a telephone is unpaired, the numbers stored
for this telephone and a phone book trans-
ferred from this cell phone are automatically
deleted.
Unpairing all Bluetooth® devices
All paired Bluetooth® devices can be unpaired in
the Bluetooth® menu.
u In the Bluetooth® menu, select the "DELETE
ALL PAIRED DEVICES" menu item.
u Press the On/Off button
The display shows "PRESS > TO CONFIRM".
Bluetooth®
4
to select a diff er-
<
.
=
.
=
for approx. 2 sec-
3
.
19