Sound settings
Making settings in the "AUDIO" menu
BASS
Bass level. Settings: –7 to +7.
u Press the rotary control
setting.
u Turn the rotary control
level is set.
u Press the rotary control
setting.
TREBLE
Treble. Settings: –7 to +7.
u Press the rotary control
setting.
u Turn the rotary control
level is set.
u Press the rotary control
setting.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
u Press the rotary control
setting.
u Turn the rotary control
volume distribution is set.
u Press the rotary control
setting.
FADER
Front/rear volume distribution. Settings: R9 (rear)
to F9 (front).
u Press the rotary control
setting.
u Turn the rotary control
volume distribution is set.
u Press the rotary control
setting.
24
7
to change the
7
until the desired
7
to confi rm the
7
to change the
7
until the desired
7
to confi rm the
7
to change the
7
until the desired
7
to confi rm the
7
to change the
7
until the desired
7
to confi rm the
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
u Press the rotary control
setting.
u Turn the rotary control
tween the settings.
u Press the rotary control
setting.
PRESET EQ (sound profi le)
Selecting equalizer presettings. Settings: PRESET
EQ POP, PRESET EQ ROCK, PRESET EQ CLAS (clas-
sic), PRESET EQ OFF (sound profi le off ; no preset-
ting).
u Press the rotary control
setting.
u Turn the rotary control
tween the settings.
u Press the rotary control
setting.
SUB-OUT
Setting the level and frequency of the preampli-
fi er output.
u Press the rotary control
u Turn the rotary control
tween the following menu items:
– FREQUENCY
(settings: 80/120/160 Hz)
– GAIN
(settings: 0 to +7)
u Press the rotary control
setting for the selected menu item.
u Turn the rotary control
frequency.
u Press the rotary control
setting.
7
to change the
7
to change be-
7
to confi rm the
7
to change the
7
to change be-
7
to confi rm the
7
to open the menu.
7
to change be-
7
to change the
7
to set the level or
7
to confi rm the
Need help?
Do you have a question about the Hamburg 420 BT and is the answer not in the manual?