Blaupunkt Hamburg 420 BT Operating And Installation Manual page 18

Bluetooth®
Making a call
u In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
u Press the rotary control
menu.
You can now enter a phone number with up
to 20 digits:
u Turn the rotary control
the respective position.
u Press the rotary control
position.
Note:
To return to the previous position in the en-
try menu, turn the rotary control
"<<<" option is selected, and press the rotary
7
control .
u Press the
button
entered.
"CALLING" and the dialed number are alter-
nately shown on the display.
As soon as your calling party answers the call,
the display shows "CALL" and the time of the
current phone call.
Upon ending the call, the display briefl y
shows "CALL END".
Calling an entry in the phone book
Note:
This function is available only if the phone
book of the connected cell phone was trans-
ferred to the car sound system (see the chap-
ter "Phone book functions").
u In the Bluetooth® menu, select the "PHONE-
BOOK" menu item.
u Press the rotary control
book.
The display shows the fi rst phone book entry.
Note:
If the phone book has not yet been trans-
ferred, the display briefl y shows "PHONE-
BOOK NOT AVAILABLE".
18
7
to open the entry
7
to select a digit for
7
to go to the next
7
until the
=
to call the number
7
to open the phone
u Turn the rotary control
ent entry.
u Press the rotary control
=
ton to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Note:
You can also call an entry in the phone book
via speed dial (see the section "Speed dial for
phone book entries" in this chapter).
Making a call with voice dial
Note:
This function is only available if the connected
cell phone supports voice dial.
u In the Bluetooth® menu, select the "VOICE
DIAL" menu item.
u Press the rotary control
=
ton to activate voice recognition.
The car sound system is muted and the dis-
play shows "SPEAK NOW".
u Say the name of the desired calling partner.
Notes:
• If no Bluetooth® connection is established
when voice recognition is activated,
the display briefl y shows "VOICE DIAL
FAILED – NO BT CONNECTION".
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display briefl y shows
"DIAL FAILED".
• You can cancel the voice recognition by
pressing the
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
• You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
7
to select a diff er-
7
or the but-
7
or the but-
<
button .