button to unlock release panel Volume control ON button, switches the unit on/ off, mute RDS button, switches the RDS convenience features on/off Selects display for variable text BND button, selects the FM memory bank and the MW and LW wavebands TS, starts the TravelStore function Display...
CONTENTS Important information ... 31 Traffic safety ... 31 Installation ... 31 Accessories ... 31 Guarantee ... 31 International telephone information . 31 Removable front panel ... 32 Switching the car audio system on/off ... 33 Volume control ... 34 Adjusting the power-on volume ...
IMPORTANT INFORMATION system functions from the steering wheel. Amplifiers All Blaupunkt amplifiers can be used. CD changers The following CD changers can be con- nected directly: CDC A 06, CDC A 08, CDC A 072 and IDC A 09.
REMOVABLE FRONT PANEL Removable front panel Theft protection system To prevent your car audio system from being stolen, it has been equipped with a removable front panel (flip release panel). Without the front panel, the car audio system is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle.
Switching the car audio system on/off The car audio system can be switched on/off in a number of ways. Switching the car audio system on/ off with the ignition If the car audio system has been con- nected to your vehicle ignition, it is pos- sible to switch it on and off with the igni- tion.
To find out which navigation systems can be used with your car radio, con- tact a Blaupunkt specialist dealer. If a traffic announcement is received during a phone call or navigation voice output and traffic information priority has been activated, you will hear the traffic announcement.
VOLUME CONTROL The volume at which phone calls or navigation voice output are heard can be adjusted. Press MENU 8. : repeatedly until “TEL/ Press NAVI VOL” appears in the display. : to select the desired Press volume level. Once you have made your selec- tion, press MENU 8 or OK ;.
RADIO OPERATION Note: It is necessary to activate/deactivate REG in the menu. Switching REG on/off Press MENU 8. : repeatedly until “REG” Press appears in the display. “OFF” or “ON” will appear next to “REG”. : to switch REG off Press or on.
Adjusting seek tuning sensitivity It is possible to adjust the sensitivity of the seek tuning function to tune the ra- dio into stations with strong reception signals only, or to those with weaker reception signals as well. Press MENU 8. : repeatedly until Press “SENS”...
RADIO OPERATION Scanning the radio stations within reception range (SCAN) You can scan all of the radio stations currently within your reception range. The scan time can be set in the menu to play from five to 30 seconds. Starting SCAN Press and hold down OK ;...
If you would like to select a different program type, press while the program type is on dis- play to switch to another program type. Press one of the station preset but- tons from 1 to 6 > to select the program type stored on that partic- ular station button.
RADIO OPERATION “SHARX OFF” means no bandwidth switching, “SHARX ON” means auto- matic bandwidth switching. Press MENU 8 or OK ;. Selecting the display of variable text A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names.
Traffic Information Memory (TIM) This car radio is able to digitally record up to four traffic messages with a total length of four minutes. The system will record the messages even when it is switched off. It is necessary to activate the TIM function first.
CD PLAYER OPERATION CD player operation The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. Danger of damage to the CD player! CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD play- We assume no liability for any dam-...
Stopping the SCAN function, continue listening to the current track To stop the SCAN function, press OK ;. The track currently scanned will contin- ue playing. Repeating individual tracks (REPEAT) To repeat the track currently play- ing, press 4 RPT >. “REPEAT TRCK”...
CD PLAYER OPERATION : to select the letter Press you want to enter. If you want to leave this position blank, select the dash. : to move the cur- Press sor to a different input position. Press MENU 8 or OK ; to store the name.
/ DIS 7 for longer than two seconds once or repeatedly as re- quired, until the desired information appears in the display. Repeating individual tracks or entire CDs (REPEAT) To repeat the track currently play- ing, press 4 RPT > briefly. “REPEAT TRCK”...
CD CHANGER OPERATION Interrupting playback (PAUSE) >. Press 3 “PAUSE” will appear in the display. Stopping PAUSE > during the pause. Press 3 Playback will resume. Naming CDs To help you to identify your CDs more easily, the car audio system allows you to individually name up to 99 CDs.
CD CHANGER OPERATION Release MENU 8. All of the CD names stored will be de- leted. Press OK ; to return to the menu. CLOCK Displaying the clock briefly To display the time briefly, press / DIS 7 briefly. Setting the time The time can be set automatically by the RDS signal.
Page 23
CLOCK : to alter the minutes. Press Once you have altered the minutes, :. The hours will begin to press flash. : to alter the hours. Press Press MENU 8 or OK ;. Selecting the 12/24-hour time display mode Press MENU 8. “MENU”...
Adjusting the tone and balance/fader Adjusting the bass To adjust the bass, press AUD / LD “BASS” will appear in the display. : to alter the bass. Press Adjusting the treble To adjust the treble, press AUD / LD =. “BASS”...
EQUALIZER Equalizer This car audio system is equipped with a parametric digital equalizer. In this case, parametric means that it is possi- ble to individually raise or lower one fre- quency (GAIN +10 to -20 dB) for each of the five filters. The following filters are available: SUB LOW EQ 32 to 50 Hz...
EQUALIZER Adjusting the spectrometer The spectrometer in the display uses symbols to temporarily indicate what adjustments are made to the volume, the tone and balance/fader and the equalizer settings. If no adjustments are being made to the system, the spectrometer displays the output level of the car radio.
Your car audio system has been equipped with a TMC output to which Blaupunkt navigation systems can be connected. To find out which navigation systems you can use with your car audio system, contact your specialist Blaupunkt dealer.