Ford Edge Owner's Manual page 440

440 MyFord Touch™ (If Equipped)
When HD Radio broadcasts are active, you can access the following
functions:
When you select:
Scan
Seek
Tune
To save a multicast
station as a preset
2013 Edge (edg)
Owners Guide gf, 1st Printing
USA (fus)
You can:
Hear a brief sampling of all available stations.
This feature still works when HD Radio
reception is activated, although it does not scan
for HD2-HD7 channels. You may see the HD logo
appear if the station has a digital broadcast.
Hear the next strong radio station.
If the current station has multiple digital
broadcasts, the multicast indicator appears.
Press Seek repeatedly to advance through all
available broadcasts. If you are on the last
multicast channel, press Seek to advance to the
next strong station.
Go up and down the frequency in individual
increments.
If the current station has multiple digital
broadcasts, the multicast indicator appears.
Press Tune repeatedly to advance through all
available broadcasts. If you are on the last
broadcast channel, turn to advance to the next
frequency on the band.
When the channel is active on-screen, press and
hold a memory preset slot on the right of the
screen until the sound returns. There is a brief
mute, then the sound returns signifying it was
saved. When recalling a HD2 or HD3 memory
preset, there is a mute before the digital audio is
played as the system must once again acquire
the digital signal.
If you have turned this feature off and pressed a
memory preset containing an HD Radio
broadcast station, a pop-up appears asking you if
you would like to turn the feature back on. As
with any saved radio station, you cannot access
the saved station if your vehicle is outside the
station's reception area.