HP ProLiant MicroServer Generation 8 Specification page 5

Hp proliant microserver generation 8 (gen8)
Hide thumbs Also See for ProLiant MicroServer Generation 8:
Table of Contents

Advertisement

QuickSpecs
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Graphics
Form Factor
On System Management
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport
http://www.hp.com/support/MicroServerGen8
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Ultra Micro Tower
HP iLO Management
Engine
DA - 14565 Worldwide — Version 6 — October 11, 2013
HP ProLiant MicroServer Generation 8 (Gen8)
and our driver download page:
HP iLO Management Engine is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is
the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the
moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration history;
Health and service alerts and easy export and upload to Service and
Support.
HP Intelligent Provisioning: Lets customers provision and configure a
single server without any separate media. No more SmartStart CDs or
Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning
information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp
updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage
for additional
to get firmware and software
Page 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant microserver gen8

Table of Contents