HP ProLiant MicroServer Generation 8 Specification page 4

QuickSpecs
Standard Features
Interfaces
Industry Standard
Compliance
Server Power Cords
Power Specifications
Power Supply
System Fans
Video
HP iLO Remote
Management Network Port
Micro SD slot
USB 2.0 Ports
USB 3.0 Ports
Network RJ-45 (Ethernet) 2 (Port 1 shared for HP iLO4 as optional configuration)
ACPI V2.0b Compliant
PCIe 2.0 Compliant
PXE Support
WOL Support
USB 2.0
USB 3.0
SATA Gen 2
SATA Gen 3
The MicroServer models ship standard with a 6' country specific NEMA power cord. If customers require an
alternative local power cord, they can check the power cord matrix for the appropriate country specific
sku. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
To review typical system power ratings use the HP Power Advisor which is available via the online tool
located at URL: www.hp.com/go/proliant-energy-efficient
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
One (1) 150 Watts Non-Hot Plug, Non redundant Power Supply
One (1) - Non-redundant system fan shipped standard
DA - 14565 Worldwide — Version 6 — October 11, 2013
HP ProLiant MicroServer Generation 8 (Gen8)
1 Rear standard video
1Gb Dedicated (default iLO4 configuration)
1 Internal
NOTE: The MicroSD slot is not a hot-pluggable device. Customers should not
attempt to plug a MicroSD card into the MicroSD slot while the server is
powered.
5 total (2 front, 2 rear, 1 internal)
2 total (2 rear)
NOTE: Functional after OS boot.
or www.hp.com/go/hppoweradvisor.
Page 4