Standard Features - HP ProLiant MicroServer Generation 8 Specification

QuickSpecs

Standard Features

Processor
Cache Memory
Chipset
On System Management
Processor
Memory Protection
Memory
Network Controller
Expansion Slots
NOTE: : Intel® Celeron® G1610T and Intel® Pentium® G2020T support up to 1333MHz DDR3 memory speed.
Intel® Celeron® G1610T (2.3Hz/2-core/2MB/35W) Processor
Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor
3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium processor.
2MB (1 x 2MB) L3 Cache
NOTE: For Dual-core Celeron processor.
NOTE: All processor models above list the L3 Cache associated with that particular processor.
Intel® C204 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo.
ECC
Type
DIMM Slots Available
Standard
Maximum
NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant
MicroServer Gen8.
HP Ethernet 1Gb 2-port 332i Adapter
Expansion Technology
Slot #
1 PCIe 2.0
* Indicates the number of physical electrical lanes running to a PCI-e connector.
DA - 14565 Worldwide — Version 6 — October 11, 2013
HP ProLiant MicroServer Generation 8 (Gen8)
HP SmartMemory
DDR3 Unbuffered (UDIMM)
2
2GB (1 x 2GB) PC3-12800E DDR3 UDIMM
16GB (2 x 8GB) PC3-12800E DDR3 UDIMM
Bus
Width*
x16
Connector Form Factor
Width
x16 Low Profile
Notes
Page 2