Scanning Documents Using Timed Mode - Fujitsu ScanSnap SV600 Basic Operation Manual

Scanning Documents Using Timed Mode

This section explains how to automatically start scanning by setting the time period for the document
scanning to start.
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Settings] from the
Manager Menu" (page
a The "ScanSnap Setup Window" (page 39)
2.
In the ScanSnap setup window, select the [Scanning] tab, and click the
[Option] button.
a The [Scanning mode option] window appears.
3.
Set the time period before the ScanSnap starts scanning a document.
l To set the time period before the ScanSnap starts scanning a document after the [Scan]
button is pressed:
Select the [Specify the waiting time to start scanning after pressing the [Scan] button.]
checkbox, and then specify [Waiting time].
in the Dock while holding down the
36).
appears.
62
Scanning Documents Using Timed Mode
"ScanSnap