Fujitsu ScanSnap SV600 Basic Operation Manual page 74

- Filling in the captured fingers in image
If you edit in the book image correction mode after editing in the point retouch mode, the edited
results in point retouch mode are overridden.
1.
On the window that appears after a book is scanned, select [Double-page
spread (Book/Magazine)] and click the [Check/Correct] button.
For details about scanning a book, refer to
a The [ScanSnap Manager - Book Image Viewer] window appears.
2.
Select the page to correct the distortion.
3.
Click .
a The shape of the book is automatically detected, and the following items are displayed on
the page:
l Corner points
Corner points are displayed around the corners of the book and both ends of the gutter.
l Outline
The shape of the book is indicated with a red dashed outline.
HINT
For the output format selection button, select
4.
On the page, drag the corner points to move the corners of the book and
both ends of the gutter to any location.
On the front and back cover of the book, make the middle outline for the gutter parallel to the
right and left outlines.
"Scanning a Book" (page
.
74
Scanning Books
21).