Checking If Scansnap Manager Is Operating Normally - Fujitsu ScanSnap SV600 Basic Operation Manual

Checking If ScanSnap Manager Is Operating Normally

1.
Turn off the ScanSnap and then turn it on again.
Make sure to leave at least 5 seconds between turning off and on the ScanSnap.
If the problem persists, proceed to step 2.
2.
If you are using a USB hub, connect the ScanSnap to the computer directly
with a USB cable.
If the problem persists, proceed to step 3.
3.
Turn off the ScanSnap and restart the computer.
If the problem persists, refer to
persists, perform the procedures described in
99) once again.
"If You Have Installed the Software Before" (page
"When ScanSnap Manager Does Not Operate Normally" (page
101
When ScanSnap Manager Does Not Operate Normally
96). If the problem still