System Requirements - Fujitsu ScanSnap SV600 Basic Operation Manual

System Requirements

The ScanSnap has the following system requirements.
For the latest information on requirements, please visit the ScanSnap Support Site at:
http://scansnap.fujitsu.com/g-support/en/
Operating system (*1)
CPU
Memory
Display resolution
Disk space
USB port
*1: Updating Mac OS to the latest version is recommended.
*2: Even if you connect the ScanSnap to a USB3.0 compatible port, the scanner operates as a
USB2.0 device.
ATTENTION
l If the system requirements above are not satisfied, the ScanSnap may not operate.
l If a USB port on the keyboard or on the monitor is in use, the ScanSnap may not operate.
l When using a commercially available USB hub, use a type that is powered from an electrical power
supply (and that comes with an adapter).
l Scanning speed decreases in the following cases:
- The CPU or the memory does not meet the recommended specifications.
- The version of the USB port or the USB hub is USB 1.1.
l To scan a document, a disk space that is approximately three times larger than the size of the file
to be saved is required.
OS X v10.9
OS X v10.8 (recommended: 10.8.5 or later)
Mac OS X v10.7 (recommended: 10.7.5 or later)
®
™
Intel Core i5 2.5 GHz or higher
4 GB or more
1024 × 768 pixels or higher
Free space required to install the software bundled with the ScanSnap is as
follows:
l ScanSnap Manager: 740 MB
l ScanSnap Organizer: 60 MB
l CardMinder: 600 MB
l ABBYY FineReader for ScanSnap: 590 MB
l ScanSnap Online Update: 10 MB
l ABBYY FineReader Express Edition for Mac: 220 MB
l Evernote for Mac: 80 MB
l ScanSnap SV600 Basic Operation Guide: 180 MB
USB3.0 (*2)/ USB2.0 / USB1.1
107
Installing the Software