Oce cm5520 User Manual page 66

Using copy functions
3
Touch the button for the desired settings, and
then touch [Position Setting].
4
Select the desired position.
– Touch [Auto] to automatically determine the
stapling or hole-punching position according to
the orientation of the loaded document. The
paper is stapled or holes are punched along the
long side of the paper if the document length is
11-11/16 inch (297 mm) or less or along the short
side of the paper if the document length is more
than 11-11/16 inch (297 mm) .
When the "2 Position" Staple setting is selected
cm5520
2
2-25