Oce cm5520 User Manual page 63

2
*1
If no finisher is installed and all of the following
conditions are met, printed copies can be fed out
and sorted in an alternating crisscross pattern.
– 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size)
paper is used.
– Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
– The "Auto" Paper setting is selected.
– The "Auto" Paper setting is not selected when the
"Mixed Original" setting is selected.
*2
If a Staple setting is selected, the "Collate (By Set)"
setting is automatically selected. The "Offset"
setting cannot be selected at the same time that a
Staple setting is selected.
*3
The Staple settings are available only if the optional
finisher is installed.
*4
The Punch settings are available only if the punch kit
is installed on the finisher.
*5
The number of punched holes differ depending on
the country (region) where the unit is installed. For
details, consult your technical representative.
*6
The Half-Fold, Center Staple & Fold and Tri-Fold settings
are available only if optional finisher 9834 is installed.
!
Detail
If the post inserter has been installed on the finisher, the
finisher can be operated manually. For details, refer to
the User's Guide [Copy Operations].
2-22
Using copy functions
cm5520