Oce cm5520 User Manual page 114

Using fax/scanning functions
– When typing in a fax number:
[Tone]: If pulse dialing is being used, touch this
button to send a push-button tone. This is used
when a fax information service is being used. "T"
appears in the screen. If pulse dialing is being
used, use
[Pause]: Touch this button to insert a pause when
dialing. Touch [Pause] once to insert a 1-second
pause. In addition, multiple pauses can be
entered. "P" appears in the screen. If the PBX
(private branch exchange) connection is enabled,
touch [Pause] after the outside line access code
(for example, "0") for reliable dialing when
transmitting from an inside line to an outside line.
"P" appears in the screen.
[–]: Touch this button to insert the dash as
separator symbol while dialing. This has no effect
on the dialing. "–" appears in the screen.
– To change a character in the entered text, touch
[←] and [→] to move the cursor to the character
to be changed, and then touch [Delete].
3
Touch [OK].
– If a destination registration number is entered,
touch [OK], and then touch [OK] in the next
screen that appears.
cm5520
to switch to a push-button tone.
3
3-17