Panasonic FP-X Specifications page 2

High Performance, Multiple Functions, and Strengthened
Lineup to Support a Wider Variety of Applications
High-speed Operation
The 32-bit RISC processor provides the top-level processing speed in
compact PLCs. The scan time is 2 ms or less for 5,000 steps*
speed PLC is indispensable for enhancing the functionality of equipment.
*1 Basic instructions: 40%, Data transfer and operation instructions: 60%
Large Capacity Program Memory
FP-X, which is equipped with 32k steps*
covering the increasing functions, such as communications, positioning, and
analog control. The sufficient program capacity can also support future
equipment modifications.
*2 C14: 16k steps
Independent Comment Memory
There are difficulties with program management on a PC, such as identifying
the latest program. The use of the program in the PLC of equipment in
operation is often regarded as the best option. Since FP-X has an
independent comment memory, all comments can be stored in the PLC
together with programs, facilitating program management and maintenance.
Maximum Number of I/O Points
Since up to eight expansion units can be connected to one control unit, the
maximum number of I/O points is 300. Furthermore, with the add-on
cassette and expansion FP0 adapter connected, the number of I/O points
can be increased to 382.
Up to Three Channels
Three channels are available with a combination of a communication cassette (two-channel
type) and the tool port.
The combinations of a wide variety of communication functions can support diversified applications.
Ethernet
With a communication cassette (Ethernet type), inspection data, production
data, and error information can be easily collected.
Modbus-RTU
Communications with equipment compatible with Modbus-RTU (binary), a
worldwide de-facto standard, are available without programming. E.g.
temperature controllers and inverters
PLC Link
With a communication cassette (RS485 type), bit data/word data can be
easily shared among up to 16 FP-X units.
Computer Link
Easy communications with equipment compatible with Matsushita's open
protocol "MEWTOCOL" are available without programming. E.g. displays,
image processors, temperature controllers, and power meters
General-purpose Serial Communications
Commands are generated/transmitted in accordance with the communication protocol of the target
equipment.
Or, nonprocedural data receiving is available. E.g. measuring instruments, barcode readers, and RF-ID
2
1
. A high-
2 program memory, is ideal for fully
Faster operation of basic instructions Faster operation of high-level instructions
E.g. ST, AN or OR
Reduction of total scan time
Multi-axial positioning Temperature control
Increase in
Network Data processing
number and
complexity
SCADA system Multi-point I/O
of programs
Displays Measuring instrument
Inside of FP-X
Comment Program
Independent
memory memory
Max.
3 Ports
E.g. floating point operation instructions
AFPX-C30R
(Add-on cassette attached)