Panasonic FP-X Specifications page 5

FP-X Name and Function of Each Part
Input terminals
Power terminals
I/O status monitor LED
USB communication port (excluding C14R)
RUN/PROG. mode selection switch
Potentiometer
RS232C tool port
24 V DC service power output terminals
C14: 0.15 A
C30, C60: 0.4 A
(DC powered type has no service power output)
Input terminals
I/O status monitor LED
Connector for expansion unit
Connector for double-stacked mounting
* Only the communication cassette can be upper.
Control Unit
(Model: Relay output type AFPX-C30R)
Expansion Unit
(Model: Relay output type AFPX-E16R)
Add-on Cassette
(Model: Analog input cassette AFPX-AD2)
Input/output terminals or communication signal terminals
Add-on cassette interface cover
Connector for
add-on cassette
Connector for
expansion unit
Connector
for battery
Connector for expansion unit
Output terminals
Connector for expansion unit
Output terminals
Securing hole
* Use the two opposite diagonal holes
for mounting when a communication
cassette is double-stacked.
5