Sound Adjustment; Sdi Sound Output - Panasonic TH-103PB1U Operating Instructions Manual

Display operations interactive plasma display
Hide thumbs Also See for TH-103PB1U:
Table of Contents

Advertisement

SOUND Adjustment

1
2
Select to adjust each item.
3
Item
Select the audio output.
SPEAKERS: Internal speakers
AUDIO OUT: AUDIO OUT terminal output
Notes:
OUTPUT SELECT
STANDARD: Emits the original sound.
AUDIO MENU
DYNAMIC:
CLEAR:
BASS
Adjusts low pitch sounds.
MID
Adjusts normal sounds.
TREBLE
Adjusts high pitch sound.
BALANCE
Adjusts left and right volumes.
SURROUND
Select ON or OFF.
Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
Helpful Hint (
While the "SOUND" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.

SDI SOUND OUTPUT

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)
SDI SOUND OUTPUT
LEFT CHANNEL
RIGHT CHANNEL
SOUND OUT
LEVEL METER
32
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
If "AUDIO OUT" is selected, only "BALANCE" can be set. The other menus are grayed out and cannot be set.
The audio output options will be displayed when you adjust audio volume.
VOLUME (SPEAKERS)
Audio volume and "BALANCE" settings are memorized separately for each audio output.
Accentuates sharp sound.
Attenuates human voice.
/
Normalization)
NORMALIZE
2/2
LEFT CHANNEL
CHANNEL 1
CHANNEL 1
RIGHT CHANNEL
OFF
OFF
LEVEL METER
Details
30
Item
CHANNEL 1 to CHANNEL 16
Selects left audio channel.
CHANNEL 1 to CHANNEL 16
Selects right audio channel.
ON
SOUND OUT
ON:
Enables audio output.
OFF: Disables audio output.
OFF
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
OFF: Hides the audio level meter.
1-8CH: Displays the audio level meter (1-8ch)
9-16CH: Displays the audio level meter (9-16ch)
SOUND
NORMALIZE
NORMAL
OUTPUT SELECT
AUDIO MENU
BASS
MID
TREBLE
BALANCE
SURROUND
Details
OFF
1-8CH
9-16CH
1/2
SPEAKERS
STANDARD
0
0
0
0
OFF

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents