SETUP for MULTI DISPLAY
By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set up with a Display number to determine its location.
Note:
During Touch Pen mode, "MULTI DISPLAY SETUP" becomes "OFF" and this function cannot be used.
(Example)
group of 4 (2 × 2) group of 9 (3 × 3)
How to setup MULTI DISPLAY
1
Select "MULTI DISPLAY SETUP" in "SETUP" menu and press
2
Item
MULTI DISPLAY SETUP
HORIZONTAL SCALE
VERTICAL SCALE
SEAM HIDES VIDEO
LOCATION
group of 16 (4 × 4)
Press to select the MULTI DISPLAY SETUP.
Press to select "ON" or "OFF".
Select "ON" or "OFF".
Note: If you set MULTI DISPLAY SETUP to ON, PORTRAIT SETUP will be unavailable.
Select "× 1", "× 2", "× 3", "× 4", "× 5".
Select "× 1", "× 2", "× 3", "× 4", "× 5".
Select "ON" or "OFF".
Select the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1)
( 2 × 3 )
group of 25 (5 × 5)
button.
Details
To hide joints between displays.
Suitable for moving image display.
ON
( 4 × 2 )
( 4 × 4 )
MULTI DISPLAY SETUP
MULTI DISPLAY SETUP
OFF
HORIZONTAL SCALE
VERTICAL SCALE
SEAM HIDES VIDEO
OFF
LOCATION
VIDEO WALL UNIFORMITY
OFF
To show joints between displays.
Suitable for still image display.
OFF
( 5 × 5 )
A1
A2
A3
A4
A5
B1
B2
B3
B4
B5
C1
C2
C3
C4
C5
D1
D2
D3
D4
D5
E1
E2
E3
E4
E5
× 2
× 2
A1
45