Connections; Ac Cord Connection And ¿ Xing, Cable ¿ Xing - Panasonic TH-103PB1U Operating Instructions Manual

Connections

AC cord connection and ¿ xing, cable ¿ xing
– AC cord ¿ xing
Note:
Make sure that the
AC cord is locked on both
the left and right sides.
– Cable ¿ xing bands
Secure any excess cables with bands as required.
Note:
Two ¿ xing bands are supplied with this unit. In case of securing cables at four positions, please purchase it separately.
Pass the attached cable
¿ xing band through the
clip as shown in the
¿ gure.
1
10
Plug the AC cord into
1
the display unit.
Plug the AC cord until
it clicks.
Fix the AC cord with
2
the clamper.
To secure cables connected to Terminals, wrap the cable ¿ xing band around them then
pass the pointed end through the locking block, as shown in the ¿ gure.
While ensuring there is suf¿ cient slack in cables to minimize stress (especially
in the power cord), ¿ rmly bind all cables with the supplied ¿ xing band.
To tighten:
Pull
2
Close
Push until
the hook clicks.
Open
2. Pull off.
1. Keep the
knob pressed.
To loosen:
Push the catch
Unplug the AC cord
Unplug the
AC cord
pressing the
two knobs.
Note:
When disconnecting the AC
cord, be absolutely sure to
disconnect the AC cord plug
at the socket outlet ¿ rst.
Pull