Customizing The Input Labels - Panasonic TH-103PB1U Operating Instructions Manual

Customizing the Input labels

This function can change the label of the Input signal to be displayed. (see page 18)
Select "INPUT LABEL" in "SETUP" menu and press
INPUT LABEL
SLOT INPUT
SLOT INPUT
VIDEO VIDEO
COMPONENT COMPONENT
HDMI HDMI
DVI
DVI
PC PC
NETWORK NETWORK
Image input Input label
[SLOT INPUT]*1 SLOT INPUT / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV /
VCR / STB / (SKIP)
[VIDEO] VIDEO / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR /
STB / (SKIP)
[COMPONENT]*2 COMPONENT / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV /
VCR / STB / (SKIP)
[HDMI] HDMI / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR /
STB / (SKIP)
[DVI] DVI / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR / STB /
(SKIP)
[PC] PC / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR / STB /
(SKIP)
[NETWORK] NETWORK / (SKIP)
*1 "SLOT INPUT" is displayed when a Terminal Board is installed.
*2 "COMPONENT" may be displayed as "RGB" depending on the setting of "COMPONENT/RGB-IN SELECT".
(see page 49)
When a Terminal Board with dual input terminals is installed
"SLOT INPUT" is displayed as "SLOT INPUT A" and "SLOT INPUT B" and independent settings are available.
[SLOT INPUT A] SLOT INPUT A / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV / VCR /
STB / (SKIP)
[SLOT INPUT B] SLOT INPUT B / DVD1 / DVD2 / DVD3 / DVD4 / Blu-ray1 / Blu-ray2 / Blu-ray3 / Blu-ray4 / CATV /
VCR / STB / (SKIP)
When a Terminal Board with ¿ xed display (such as Tuner Board) is installed
Only ¿ xed display and (SKIP) are available as Input label of "SLOT INPUT".
¿ xed display / (SKIP)
[SLOT INPUT]
42
button.
(SKIP) : The INPUT button press will skip its input.