No Activity Power Off; Menu Display Duration / Osd Brightness; Osd Language; Display Orientation - Panasonic TH-103PB1U Operating Instructions Manual

NO ACTIVITY POWER OFF

DISABLE ENABLE
When this function is set to "ENABLE", the power is turned off (standby) automatically when there is no operation of the
Plasma Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
When the power is turned off due to this function, a message "LAST TURN OFF DUE TO 'NO ACTIVITY POWER
OFF'." is displayed next time the power is turned on.
Note:
During the screensaver is running, this function is disabled.

MENU DISPLAY DURATION / OSD BRIGHTNESS

Set the display time and brightness of the on-screen menu display.
MENU DISPLAY DURATION: 5 S – 30 S
OSD BRIGHTNESS: 1 – 5

OSD LANGUAGE

Select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
(Chinese)
(Japanese)
(Russian)

DISPLAY ORIENTATION

Sets the fan control, panel drive control, and the display style of on-screen menu for vertical installation.
LANDSCAPE
Fan control and panel drive control
for horizontal installation.
Notes:
• If the display is installed vertically, the power switch should be located at the bottom.
• When you change this setting, fan control and panel drive control will be switched as the power is turned on next time.
44
Fan control and panel drive control for vertical installation. On-screen menu
will be rotated 90 degrees counterclockwise to be suitable for the setting.
PORTRAIT
PRESS ANY KEY TO ABORT.
NO ACTIVITY POWER OFF 3MIN