Noise Reduction; Input Signal Display - Panasonic TH-103PB1U Operating Instructions Manual

SETUP for Input Signals

• NOISE REDUCTION

Sets the following three NR (Noise Reduction) functions together.
VIDEO NR, MOSQUITO NR, BLOCK NR
Press to select "NOISE REDUCTION".
Press to select "OFF", "MIN", "MID", "MAX",
"ADVANCED".
Advanced NR
Sets the three NR functions separately.
1
Press to select "ADVANCED".
Press to enter ADVANCED NR.
P r e s s t o s e l e c t V I D E O N R ,
2
MOSQUITO NR or BLOCK NR.
Press to select "OFF", "MIN", "MID",
"MAX".
VIDEO NR: Automatically reduces unwanted picture noise.
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR: Reduces block noise when playing MPEG videos.
Note:
NOISE REDUCTION cannot be adjusted while a PC signal is being applied.

• Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during DVI signal input.
52
NOISE REDUCTION
NOISE REDUCTION
[ VIDEO ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
[ COMPONENT ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
SIGNAL FORMAT 1280×1024/60i
DOT CLOCK FREQ.
SIGNAL FORMAT 1280×1024/60i
( )
OFF
( )
ADVANCED
[ RGB ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
[ Digital ]
ADVANCED NR
VIDEO NR OFF
MOSQUITO NR OFF
BLOCK NR OFF
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
108.0 MHz