Sound Adjustment; Sdi Sound Output - Panasonic TH-42PH20ER Operating Instructions Manual

Sound Adjustment

1
2
Select to adjust each item.
3
Item
Normal: Emits the original sound.
Sound Mode
Dynamic: Accentuates sharp sound.
Bass Adjusts low pitch sounds.
Treble Adjusts high pitch sounds.
Balance Adjusts left and right volumes.
Note: Bass and Treble settings are memorized separately for each Sound Mode.
Helpful Hint (
While the "Sound" menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.

SDI Sound Output

This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.
SDI Sound Output
Left Channel
Right Channel
Sound Out
Level Meter
Note:
This menu is available only when selecting
a slot that HD-SDI Terminal Board with
audio (TY-FB10HD) is installed.
26
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
/ Normalisation)
Normalise
2/2
Left Channel
Channel 1
Channel 1
Right Channel
Off
Off
Sound Out
Level Meter
Details
Item
Channel 1 to Channel 16
Selects left audio channel.
Channel 1 to Channel 16
Selects right audio channel.
On Off
On: Enables audio output.
Off: Disables audio output.
Off 1-8ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off: Hides the audio level meter.
1-8ch: Displays the audio level meter (1-8ch)
9-16ch: Displays the audio level meter (9-16ch)
Sound
Normalise
Normal
Sound Mode
Bass 0
0
Treble
Balance 0
Details
9-16ch
1/2
Normal